home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1996 September
/
CHIP 1996 szeptember (CD07).zip
/
CHIP_CD07.ISO
/
drivers
/
ati
/
64ust201
/
readme.txt
< prev
Wrap
Text File
|
1995-12-13
|
3KB
|
82 lines
64UST201.ZIP - ATI Technologies Inc.
█████████████████████████████████████████████ ATI Technologies Inc.
████████(R)███▀ ▄▄▄ ▀██ 33 Commerce Valley Drive East
████████████▀ ▀▀▀ ▄██ Thornhill, ON L3T 7N6
██████████▀ ▄█████ █████████████████ CANADA
████████▀ ▄██▀▀███ ████████▀ ▀████
██████▀ ▄███ ██ ████████ ████ Support: (905) 882-2626
████▀ ▄██████▄▄███ ████████ ████ Support FAX: (905) 882-0546
██▀ ▄█████████████ ████████ ████ Compuserve: GO ATITECH
██▄ ▄███████████████▄ ▄████████▄ ▄████ ┌─────────────────────────────┐
████▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█████ │ ATI mach64 v2.01 │
███▌ T E C H N O L O G I E S I N C . ▐████ │ panaStation drivers for │
████▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█████ │ Microstation 4.0 and 5.0 │
█████████████████████████████████████████████ └─────────────────────────────┘
Length Method Size Ratio Date Time CRC-32 Attr Name
------ ------ ----- ----- ---- ---- -------- ---- ----
948 Implode 408 57% 11-01-95 11:37 9cb7cc10 --w- LOAD64.VSF
773 Stored 773 0% 10-20-95 10:35 807c36c0 --w- DRVRNOTE.LZH
76390 Stored 76390 0% 10-17-95 14:57 4447069d --w- USDRIVER.LZH
20515 Implode 12134 41% 03-10-95 14:06 7056a069 --w- USINST.EXE
994 Implode 593 41% 12-22-94 08:51 17c42806 --w- USINST.HLP
1685 Implode 925 46% 11-13-95 11:14 a70f0fb2 --w- README.BBS
------ ------ --- -------
101305 91223 10% 6
*****************************
1.0 Introduction
2.0 Installation Notes
*****************************
1.0 Introduction
This product was developed by Panacea Inc. exclusively for use with
ATI's family of mach64 accelerators. This version of PanaStation has
been designed to specifically support DOS versions of MicroStation
1.0, 2.0, 3.0, 4.0 and 5.0.
*****************************
2.0 Installation Notes
1. Ensure that you have a copy of LOAD64.ZIP. The LOAD64 utility is
used to install this driver. LOAD64.ZIP is available on the ATI BBS,
ftp site (ftp.atitech.ca), and on our CompuServe forum (GO ATITECH).
2. Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later.
PKUNZIP is available on most BBS and information services, including
the ATI BBS and CompuServe.
3. Do NOT attempt to perform the driver installation from within
AutoCAD. Exit AutoCAD completely, and perform the following
operations in DOS.
4. Unzip LOAD64.ZIP and 64UST201.ZIP into the same temporary
directory on your hard disk, then run the LOAD64 utility. For
example:
MD \ATITEMP
PKUNZIP LOAD64.ZIP \ATITEMP
PKUNZIP 64UST201.ZIP \ATITEMP
CD \ATITEMP
LOAD64
5. Follow the screen prompts for installing the drivers.
6. Once the driver has been installed, you can delete the contents of
the temporary directory (DEL \ATITEMP\*.*) and delete the directory
itself (RD \ATITEMP).
7. We recommend that you copy the ZIP files (64UST201.ZIP and
LOAD64.ZIP) to floppy disk, in case you need to install the driver
again.
8. For further configuration instructions, please consult the file
MANUAL.TXT.